Measurement of Length and Motion Class 6 NCERT Solutions Chapter 5
Step by step answers to every question of Chapter 5 of the Class 6 Science book Curiosity, with revision notes, extra questions and FAQs.
Measurement of Length and Motion Class 6 Chapter at a Glance
Chapter 5 of Class 6 Science, Measurement of Length and Motion, explains why we need standard units, how to measure length correctly and how to describe different kinds of motion.
These solutions answer every question of the chapter in the order of the book, with the working shown wherever a calculation is needed.
- Measurement = comparing an unknown quantity with a known fixed quantity (unit).
- The SI unit of length is the metre (m). 1 km = 1000 m; 1 m = 100 cm; 1 cm = 10 mm.
- Correct use of a scale: place it along the length, start from a clear mark (if the zero is broken), keep the eye exactly above the reading.
- Curved lengths are measured with a thread or a flexible measuring tape.
- An object is in motion if its position changes with time with respect to a reference point; otherwise it is at rest.
- Types of motion: linear (along a straight line), circular (along a circular path), oscillatory (to and fro about a fixed point).
Key Terms in Measurement of Length and Motion Class 6
Measurement of Length and Motion Class 6 NCERT Solutions Curiosity
Every question of Chapter 5 is solved below in the order of the book, with the reason written under each answer.
Large distances are measured in km, medium lengths in m, small lengths in cm and very small lengths in mm. Length (Column I) Suitable unit (Column II) Distance between Delhi and Lucknow kilometre (km) Thickness of a coin millimetre (mm) Length of an eraser centimetre (cm) Length of school ground metre (m)
(i) True – it moves along a straight line. (ii) True – this is the definition of motion. (iii) False – 1 km = 1000 m = 1000 × 100 cm = 1,00,000 cm .
mm, cm and km are standard units based on the metre – they are the same for everyone. A handspan differs from person to person, so it is not a standard unit. Answer: (iv) handspan
Look at the smallest division (gap between two nearest marks) on each instrument. Sample observations: Scale / tape Where found Smallest value it can 15 cm (or 30 cm) ruler Geometry box 1 mm Metre scale (wooden) School 1 mm (some show only 1 cm) Tailor's measuring tape Home 1 mm or 0.5 cm Steel measuring tape Home / workshop 1 mm (carpenter's) Surveyor's tape (long) Sports ground 1 cm (Your values may differ depending on the scales available.)
1 km = 1000 m 1.5 km = 1.5 × 1000 m = 1500 m Answer: 1500 m
A curved length cannot be measured directly with a straight scale, so we use a thread: 1. Wrap a thread tightly once around the base of the tumbler. Mark the point where the thread meets its starting end. 2. Straighten the thread and measure the marked length with a scale (or use a flexible measuring tape directly). 3. Repeat 2–3 times and take the average. Sample reading: for a steel tumbler of base diameter 7 cm, the curved length is about 22 cm . (Your answer depends on your tumbler.)
Make your friend stand straight against a wall without shoes. Place a ruler flat on the head touching the wall, mark the point, and measure from the floor to the mark with a measuring tape. Sample: height = 142 cm. (i) In metres: 142 ÷ 100 = 1.42 m (ii) In centimetres: 142 cm (iii) In millimetres: 142 × 10 = 1420 mm
Estimate: By looking, guess about 10 coins of ₹10 for the longer side of the notebook. Verify: Diameter of a ₹10 coin, measured with the scale ≈ 2.7 cm. Longer side of the notebook ≈ 27 cm (the 15-cm scale is used twice, marking where it ends). Number of coins = 27 cm ÷ 2.7 cm = 10 coins . Compare the estimate with the result. (Values depend on your coin and notebook.)
Size Objects mm Thickness of a coin, lead of a pencil, an ant, thickness of a mobile cm Pencil, eraser, notebook, a leaf m Classroom, school ground, height of a tree, saree
- A to B – the track is straight (a slope): linear motion . → → →
- B C D E – the ball goes around the loop: circular motion .
- E to F – the track is straight again: linear motion . Answer: A–B linear; B–C–D–E circular; E–F linear
A scale must not change its length when used, and must be straight and firm.
- Stretchable rubber – should NOT be used; it stretches, so its length changes and readings would be wrong.
- Cloth – should NOT be used; it can stretch, fold and shrink when washed.
- Paper is not a good choice either – it can tear, fold or get damaged by water.
- Plywood and steel are suitable – they are rigid and do not change their length easily. Answer: Not rubber and cloth (and preferably not paper); use plywood or steel.
Game: 'Length Snap' (2–4 players) 1. Make 40 cards. Write pairs of equal lengths in different units on separate cards – e.g. '1 km' and '1000 m', '2.5 m' and '250 cm', '45 mm' and '4.5 cm', '0.5 km' and '500 m', '3 cm' and '30 mm'. 2. Shuffle and distribute all cards face down. 3. Players turn over one card at a time onto a central pile. 4. When the top two cards show equal lengths, the first player to say 'SNAP!' and correctly explain the conversion wins the pile. 5. A wrong 'snap' costs a card. The player who collects all cards (or most after 10 minutes) wins. This game helps practise 1 km = 1000 m, 1 m = 100 cm and 1 cm = 10 mm quickly.
Measurement of Length and Motion Class 6 Quick Revision Notes
Measurement means comparing a quantity with a standard unit. A measurement is written as a number followed by the unit, such as 25 cm.
Body parts such as the hand span and the footstep differ from person to person, so they cannot be used as standard units. This is why the world agreed on the SI system.
The SI unit of length is the metre. 1 m = 100 cm, 1 cm = 10 mm and 1 km = 1000 m.
To measure correctly, place the object along the scale, start from a clear mark such as zero or 1 cm, keep the eye directly above the reading to avoid parallax error and subtract if you did not start from zero.
A curved line is measured with a thread. Lay the thread along the curve, mark the ends, then straighten the thread against a scale.
An object is at rest if its position does not change with time and in motion if its position changes with time. Rest and motion are relative, because they depend on the object we compare with.
Types of motion include rectilinear motion along a straight line, circular motion along a circular path and periodic motion that repeats after a fixed time. Many objects show more than one type at the same time.
Important Points to Remember
Common Mistakes Students Make
Measurement of Length and Motion in Real Life
Extra Questions with Answers
These questions are not from the book. They are made for extra practice and for tests.
The metre, written as m.
Ten millimetres.
Periodic motion, because it repeats after a fixed interval of time.
The length of a hand span, a cubit or a footstep is different for different people, so the same object would give different measurements. A standard unit must be the same for everybody everywhere, which is why the metre is used.
Put a knot at one end of a thread and place the knot at the start of the curve. Lay the thread carefully along the curve and mark the point where the curve ends. Now stretch the thread along a scale and read the length between the knot and the mark.
Parallax error is the wrong reading obtained when the eye is not directly above the mark on the scale. It is avoided by keeping the eye straight above the point being read.
A broken scale has no zero mark, so choose a clear mark such as 1 cm and place one end of the pencil exactly there. Keep the scale along the pencil and your eye directly above the other end to avoid parallax error. Suppose the other end reads 11.5 cm. The length of the pencil is 11.5 minus 1, which is 10.5 cm. The method works because what matters is the difference between the two readings.
In rectilinear motion an object moves along a straight line, as a train does on a straight track. In circular motion an object moves along a circular path, as the blades of a fan do. In periodic motion the movement repeats after a fixed time, as in a swinging pendulum or a child on a swing. Many objects show more than one kind at once, for example a moving bicycle wheel turns in a circle while the bicycle moves in a straight line.
The Measurement of Length and Motion Class 6 worksheet page has an online quiz, interactive games and a printable worksheet with answers.
Start the online quiz →Exam Tips for Chapter 5
- Always write the unit with the number in every answer.
- Show the subtraction clearly when a broken scale is used.
- Learn the conversions between km, m, cm and mm.
- Name the type of motion and give one example in the same sentence.
- Mention the reference object when you talk about rest and motion.
Measurement of Length and Motion Class 6
Read the full chapter descriptionTap to open
Measurement of Length and Motion is the fifth chapter of the Class 6 Science book Curiosity. It joins two ideas that belong together, because to say how far something has moved we must first know how to measure a distance properly.
The chapter starts with a historical problem. Long ago people measured with body parts such as the hand span, the cubit and the footstep. These are handy but they differ from person to person, so a cloth measured by one shopkeeper would not match another. That is why the world agreed on standard units, and today the SI unit of length is the metre.
Then come the practical skills. A measurement is written as a number with its unit. The object must lie along the scale, the eye must be directly above the mark to avoid parallax error, and if the scale is broken the student can start from any clear mark and subtract it from the final reading. For a curved line a thread is laid along the curve and then straightened against a scale.
The second half of the chapter turns to motion. An object is at rest when its position does not change with time, and in motion when it does. The chapter makes an important point here: rest and motion are relative. A passenger sitting in a moving bus is at rest with respect to the bus, but in motion with respect to the road.
Types of motion follow. Rectilinear motion runs along a straight line, as with a train on a straight track. Circular motion follows a circular path, as with the blades of a fan or the hands of a clock. Periodic motion repeats after a fixed interval, as with a swing or a pendulum. Real objects often show two kinds at once, which makes good discussion questions.
The chapter closes with simple distance and position work, where students use measurements to describe how far something has moved. This prepares them for speed and distance work in higher classes.
On WitKnowLearn you can read these Measurement of Length and Motion Class 6 NCERT Solutions for free, along with notes and worksheets for Class 6 Science. The solutions follow the latest NCERT book Curiosity.
Measurement of Length and Motion Class 6 FAQs
What is Chapter 5 of Class 6 Science about?
What is measurement?
What is the SI unit of length?
Why can body parts not be used as standard units?
What is parallax error?
How do you measure length with a broken scale?
How do you measure the length of a curved line?
What is the difference between rest and motion?
Why are rest and motion said to be relative?
What are the types of motion in Class 6 Science?
Are these Class 6 Science Chapter 5 solutions from the new NCERT book?
Where can I find more Class 6 Science study material?
Class 6 Science Worksheets for Practice
Practise each chapter of Curiosity with a worksheet that has an online quiz, interactive games and answers.
WitKnowLearn · Worksheets, Notes and NCERT Solutions for Class 6 Science.
